B&R ACOPOSinverter P84, Руководство пользователя

Страница: 147 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 147
Code Name/Description Setting range Factory settings
SP2 [Preset speed 2] 0 to 599 Hz 10 Hz
see "PRESET SPEEDS (PSS-)" on page 211 .
2nd preset frequency
SP3 [Preset speed 3] 0 to 599 Hz 15 Hz
3rd preset frequency
SP4 [Preset speed 4] 0 to 599 Hz 20 Hz
4th preset frequency
SP5 [Preset speed 5] 0 to 599 Hz 25 Hz
5th preset frequency
SP6 [Preset speed 6] 0 to 599 Hz 30 Hz
6th preset frequency
SP7 [Preset speed 7] 0 to 599 Hz 35 Hz
7th preset frequency
SP8 [Preset speed 8] 0 to 599 Hz 40 Hz
8th preset frequency
SP9 [Preset speed 9] 0 to 599 Hz 45 Hz
9th preset frequency
SP10 [Preset speed 10] 0 to 599 Hz 50 Hz
10th preset frequency
SP11
[Preset speed 11]
0 to 599 Hz 55 Hz
11th preset frequency
SP12 [Preset speed 12] 0 to 599 Hz 60 Hz
12th preset frequency
SP13 [Preset speed 13] 0 to 599 Hz 70 Hz
13th preset frequency
SP14
[Preset speed 14]
0 to 599 Hz 80 Hz
14th preset frequency
SP15 [Preset speed 15] 0 to 599 Hz 90 Hz
15th preset frequency
SP16 [Preset speed 16] 0 to 599 Hz 100 Hz
16th preset frequency
MFr [Multiplying coeff.] 0 to 100% 100%
Access to the coefficients is possible if
[Multiplier ref. -]
(MA2,MA3) ( see "CONFIG REF (OAI-)" on page 203 ) has been assigned to the graphic
display terminal.
SrP [+/-Speed limitation] 0 to 50% 10%
see "+/- SPEED BY REFERENCE (SrE-)" on page 215 .
Limitation of +/- speed variation.
rPG
[PID prop. gain]
0.01 to 100 1
see "PID CONTROLLER (Pld-)" on page 239 .
Proportional amplifier
rIG [PID integral gain] 0.01 to 100 1
see "PID CONTROLLER (Pld-)" on page 239 .
Integral gain
rdG [PID derivative gain] 0.00 to 100 0
see "PID CONTROLLER (Pld-)" on page 239 .
Derivative gain
PrP [PID ramp] 0 to 99.9 s 0
see "PID CONTROLLER (Pld-)" on page 239 .
Ramp-up/down ramp of the PID, which is set for a range of [min PID ref] (PIP1) to [max PID ref] (PIP2) or vice versa.
POL [Min PID output] -500 to +500 or -599 to
599, depending on the size
0 Hz
see "PID CONTROLLER (Pld-)" on page 239 .
Minimum value of regulator output in Hz.
POH [Max PID output] 0 to 500 or 599, de-
pending on the size
60 Hz
see "PID CONTROLLER (Pld-)" on page 239 .
Maximum value of regulator output in Hz.
PAL [Min fbk alarm]
1)
100
see "PID CONTROLLER (Pld-)" on page 239 .
Minimum monitoring threshold for regulator feedback.
PAH
[Max fbk alarm]
1)
1000
see "PID CONTROLLER (Pld-)" on page 239 .
Maximum monitoring threshold for regulator feedback.
1) If there is no graphic display terminal, then on the four-digit display the values over 9999 are shown with one point after the thousands unit, for example,
15.65 for 15650.
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can also be
accessed and adjusted from within the configuration menu for the corresponding function, their description is detailed in these menus, on
the pages indicated, to aid programming.