B&R ACOPOSinverter P84, Руководство пользователя

Страница: 203 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 203
[REFERENCE SWITCH.] (rEF-)
Code Name/Description Factory settings
rEF- [REFERENCE SWITCH.]
rCb [Ref 1B switching] [Unlimited] (Fr1)
Fr1 [Unlimited] (Fr1) : No switchover, [ref.1 channel] (Fr1) active
Fr1b [Unlimited] (Fr1) : No switchover, [channel1B act] (Fr1b) active
LI1
[LI1]
(LI1)
- .
- .
- .
[...] (...) : See the assignment conditions, except CDOO to CD14 .
In state 0 of the input or the assigned bit [ channel ref1] (Fr1) is active.
In state 1 of the input or the assigned bit [ Kanal1B act] (Fr1b) is active.
[Switch ref 1B] (rCb) is forced to [unlimited] (Fr1) if [Profile] (CHCF) = [together] (SIM) and [channel ref1] (Fr1) is assigned to the terminal
strip (analog inputs, encoder, frequency input "pulse input")
[Channel 1B act] [No] (nO)
nO [No] (nO) : Not active
AI1 [AI1] (AI1) : Analog input
AI2 [AI2] (AI2) : Analog input
LCC [HMI] (LCC) : Graphics terminal
Mdb [Modbus] (Mdb) : Not usable
CAn [CANopen] (CAn) : Integrated bus interface
nEt
[Com. Card]
(nEt) : Communication card, if present
PG [Encoder] (PG) : Encoder input, if encoder card present
Note:
In the following cases, assignments are only possible via the terminals:
•
[Profile] (CHCF) = [together] (SIM) and [channel ref1] (Fr1) is assigned via the terminals (analog inputs, encoder, pulse
input)
•
PID is configured with PID reference values via the terminals