Model HR-ADC1
Analog to Digital Audio Converter
•
Broadcast Quality Analog to Digital Audio Conversion
•
Inputs: Balanced and Unbalanced Stereo Audio
•
Output: AES/EBU, Coaxial S/PDIF, AES-3ID
•
External Sync Inputs: AES/EBU, Coaxial S/PDIF, AES-3ID
•
Adjustable Audio Input Gain Trim
•
Peak or Average Ballistic Metering with Selectable 0 dB Reference
•
Peak Metering with Selectable Hold or Peak Store Modes
•
Operation Up to 24 bits, 192 kHz
•
Selectable Internally Generated Sample Rate and Bit Depth
•
Front-Panel External Sync Enable Selector and Indicator
•
Sample Rate, Bit Depth, External Sync Lock Indicators
•
Transformer Isolated AES/EBU Output
The HR-ADC1 is an RDL HALF-RACK product, featuring an all metal chassis and the advanced circuitry for which RDL products are known. HALF-RACKs may be operated free-standing using
the included feet or may be conveniently rack mounted using available rack-mount adapters.
APPLICATION:
The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style.
Superior analog performance fine tuned through audiophile listening practices produces very low distortion (0.0006%), exceedingly low noise (-135 dB) and
remarkably flat frequency response (+/- 0.05 dB). This performance is coupled with unparalleled metering flexibility and programmability with average
mastering level monitoring and peak value storage. With external sync capability plus front-panel settings up to 24 bits and up to 192 kHz sample rate, the
HR-ADC1 is the single instrument needed for A/D conversion in demanding applications.
The HR-ADC1 accepts ba4 dBu or unbalanced -10 dBV stereo audio through rear-panel XLR or RCA jacks or through a detachable terminal block.
An external AES/EBU, AES-3ID or S/PDIF sync source may be connected through a rear-panel XLR, RCA or BNC jack. Digital audio outputs are provided in
AES/EBU, AES-3ID or S/PDIF formats. The rear-panel switch-selected output format is available on the corresponding XLR, RCA or BNC jack.
Front panel
LEFT
and
RIGHT
controls permit input gain adjustment to produce the desired average signal level for the digital conversion. The zero decibel
(0 dB) reference level of the audio metering string may be set to -14, -16, -18 or -20 dBFS. The meter may also be set to display peak or VU average audio
levels. Audio peaks between -10 dBFS and 0 dBFS (clipping) are displayed separately to the right of the standard audio level meter. The peak display may
be set to either flash or store the peak values. Flash duration settings provide for instantaneous, 1/3 second hold or 2/3 second hold. If the peak display is
set to
STORE
then the highest peak recorded remains displayed until the
PEAK RESET
button is pushed.
The HR-ADC1 provides rear-panel inputs for an external sync source. If valid external sync is connected, the
EXTERNAL SYNC LOCK
LED illuminates.
The front-panel
SYNC
button sets the converter to synchronize to the external source. When external sync is active, the
EXTERNAL SYNC
LED illuminates.
If external sync is selected but unavailable, the
EXTERNAL SYNC
LED flashes. When external sync is not used, the HR-ADC1 converts at the sample rate
selected using the front-panel
RATE
button. The number of
BITS
is user-selectable on the front panel. The peak LEDs double as the programming
indicators during setup. The
MODE MENU
has four selection categories:
METERING RSP
(response) allows selection of
PEAK
or
AVG
(average) for the
main audio metering display;
METERING 0 REF
allows setting the meter scaling to -14, -16, -18 or -20 dBFS for a reading of 0 dB;
DISPLAY BRT
(brightness) allows the LED display brightness to be set to
NORM
or
BRT
(bright) depending on the ambient light;
DISPLAY PEAK
allows the peak LED
string to be set to
FLASH
, hold the peak reading
1/3
second, hold the peak reading
2/3
second, or
STORE
the maximum peak reading. Programming
selections are automatically stored after five seconds and are retained in memory when the HR-ADC1 is re-powered.
The HR-ADC1 is powered from 24 Vdc, which may be connected through the detachable terminal block or through the dc power jack. A front-panel power
switch is provided. For installations requiring fixed, calibrated input levels, the HR-ADC1 front-panel knobs may be removed and replaced with security
covers, available separately (RDL SC-2 Kit of two security caps with tightening tool).
HALF-RACK
SERIES
RDL
•
659 N. 6
th
St.
•
Prescott, AZ., USA 86301
•
(928) 443-9391
•
FAX (928) 443-9392
•
www.rdlnet.com
