B&R ACOPOSinverter P84, Руководство пользователя

Страница: 171 / 405

Programming guidelines
ACOPOSinverter P84 User's Manual 2.10 171
Input and output parameters (continued)
Code Name/Description Factory settings
bSP [Reference template] [Standard] (bSd)
bSd [Standard] (bSd)
Frequency
HSP
LSP
-100%
+100%
LSP
HSP
0%
Setpoint
At zero reference the frequency = LSP
bLS [LSP limit] (bLS)
Frequency
HSP
HSP
LSP
LSP
-100%
+100%
Setpoint
At reference = 0 with LSP the frequency = LSP
bnS [Suppr LSP] (bnS)
HSP
LSP
HSP
LSP
Frequency
-100%
+100%
Setpoint
0
At reference = 0 with LSP the frequency = 0
bnS0 [deadband 0] (bnS0)
Frequency
HSP
LSP
-100%
+100%
0%
HSP
LSP
Setpoint
This process is identical to [Default] (bSd) , but in the following cases
the frequency at reference = 0 is also = 0:
• The signal is below the [min value], which in turn is greater
than 0 (example: 1 V on a 2 to 10 V input)
•
The signal is above the [min value], which in turn is greater
than 0the [max. value] (Example: 11 V on a 0 to 10 V input)
If "bidirectional" has been set for the input field, the process is identical
to [Default] (bSd) .
This parameter defines how the speed reference is taken into account, for analog inputs and Pulse input only.
In the case of the PID regulator, this is the PID output reference. The limits are defined by the parameters
[low speed]
(LSP) and
[high speed]
(HSP) ( see "Parameters that can be modified during operation or when the motor is stopped." on page 130 ).