49
Commissioning
CAUTION!
Hearing damage due to noise!
Wear hearing protection when you are working in the
direct vicinity of audible warning messages (> 85 dBA).
Remain in the vicinity of audible warning devices only
for as long as required.
16 3 Functional test
NOTICE!
Generally perform the following points prior to
commencing work!
Switch the vehicle ignition on and start the vehicle.
Switch the receiver on with the ON/OFF switch.
The diagnostics LED on the receiver flashes red.
Switch the transmitter on with the ON/OFF switch (tilt to
the right).
The diagnostics LED on the receiver blinks green.
The status LED on the transmitter flashes green (when
battery charged).
ON/OFF switch
F10 S transmitter activation
Status LED
Operating level LED
Press the stop and emergency call switch.
First the pre-alarm (2 s sound, 2 s silent) and after 30 s the
main alarm (1 s sound, 1 s silent) through the siren.
The status LED on the transmitter blinks quickly (green).
Press stop and emergency call switch
Perform any command on the transmitter (e.g. "Pull drum").
No dangerous work commands are performed and the siren
continues to sound.
Unlock the stop and emergency call switch by turning it in a
clockwise direction and first switch the transmitter off with
the ON/OFF switch and then back on again.
The siren is muted and the "Emergency" output switches
itself off again (only with main alarm).
Perform any command on the transmitter (e.g. "Pull drum").
The corresponding command is performed.
