32
Functional Description
8 2 11 Changing the wireless channel
If there are faults due to wireless controls being operated in
parallel, the wireless channel can be changed (factory setting:
channel 2).
The F10 wireless control works on the 70-cm ISM band and can
be operated on 3 wireless channels:
Channel 1: 434.175 MHz
Channel 2: 434.475 MHz
Channel 3: 434.675 MHz
Switch off the transmitter
Hold the ON/OFF switch on the transmitter for longer than
5 s in the "ON" position, the status LED lights up.
Changing to next channel up
The status LED goes off after a successful channel change
DANGER!
Danger from accidental operation of machinery
When multiple wireless controls are used in parallel,
provide the transmitters and vehicles (receivers) with
unique number stickers in order to prevent confusion,
and thus accidental operation.
