45
Parameterization
15 1 Who performs the parameterization?
Nearly all functions are already parametrized at the factory.
Additional options are also parametrized at the factory.
Functions indicated with this icon can be parametrized.
Please refer to your dealer concerning this matter.
15 2 Stutter brake parameterization
If you have also ordered the option "Stutter brake", you can set
the open time and closed time of the brake.
WARNING!
Danger from falling load
Ensure that nobody is near the load to be lowered.
Check whether the brake only follows your winch with a
slight delay when the command "Brief release" is quickly
actuated. A requirement for using the operating mode
"Stutter brake" is brief response times for opening and
closing the brake cylinder on the winch.
First read the full procedure for parameterizing the
periods for the "Stutter brake" before you begin para-
meterizing!
Application:
Controlled lowering of loads
Description:
The winch brake is opened and closed automatically at short,
parameterizable time intervals. In so doing the open time (OT)
and closed time (CT) of the brake changes periodically. The
longer the closed time is in comparison to the open time, the
slower the load is lowered.
3 examples for setting the open time (OT) and closed time (CT)
Example 1: Slow lowering: OT = short, CT = long
Example 2: Medium lowering: OT = short, CT = short
Example 3: Quick lowering OT = long, CT = short
Brake
Brake
Brake
Closed
Closed
Closed
Open
Open
Open
CT
OT
Example settings for OT and CT of the "Stutter brake" function.
15 Parameterization
