background image

64

 Operation

Switch the transmitter off by pressing the ON/OFF switch 

towards "OFF" (O).

Switch the transmitter back on by pressing the ON/OFF 

switch towards "ON" (I).

The siren and the "Emergency" output are switched off. The 

alarm is reset.

17 3 15  Switch off "Passive emergency"

If you switch off the passive emergency monitoring 

once the deactivation is saved (even with the transmit-

ter or receiver switched off). Then 

no more emergency 

calls

 are transmitted with passive emergency criteria. 

If the function is required again then it must be reac-

tivated.

Status LED

Operating level LED

Switch off "Passive emergency"

The transmitter must be switched off.

Press the switch ("Release brake") towards the body and 

hold the switch in this position.

Press the switch ("Gas –") towards the body and hold the 

switch in this position.

Press the ON/OFF switch towards "ON" (I) and keep it in this 

position.

Status LED lights up green.

Operating level LED lights up orange.

Let go of all 3 switches so that they go back to their resting 

position.

The operating level LED lights up red and the siren is trigge-

red briefly twice.

Passive emergency is deactivated and the transmitter swit-

ches itself off again.

Switch the transmitter back on (see operation / F10 S 

transmitter) as soon as you want to resume your work.

Details: See function description / functions / function passive 

emergency call ("passive emergency")

Содержание F10













































































Отзывы: