61
Operation
17 3 11 Triggering "Active emergency"
Active emergency command
CAUTION!
Hearing damage due to noise!
Wear hearing protection when you are working in the
direct vicinity of audible warning messages (> 85 dBA).
Remain in the vicinity of audible warning devices only
for as long as required.
Press the stop and emergency call switch until it locks into
place.
Active emergency is triggered, the green status LED blinks
quickly (the color green / red depends on the battery charge
status)
Activated commands are switched off immediately and
other dangerous commands (e.g. "Pull drum") are blocked
(command lock).
When the "Siren" output is activated, the audible pre-alarm
phase simultaneously begins (2 s sound, 2 s pause, etc.).
WARNING!
Danger from vehicle functions that are not triggered by
the remote control
The stopping of the winch by pressing the stop and
emergency call switch has nothing to do with the
"Emergency off" of the machine. In the event of emer-
gencies, ensure that the "Emergency off" of the machine
is pressed separately.
Details: See function description / functions / function active
emergency call ("active emergency")
After a period of time parameterizable at the factory (facto-
ry setting: 30 s) the "Emergency" output is activated and the
main alarm is tripped (siren: 1 s sound, 1 s pause, etc.).
The stop and emergency call switch remains functional
even when the transmitter is switched off. By actuating
the stop and emergency call switch the transmitter can be
switched back on. If the stop and emergency call switch is
pressed, the transmitter cannot be switched off again.
