66
Operation
17 4 Eliminate fault states
No
Fault
Solution
1
Diagnostics LED on the receiver is off
Check the reciever and voltage supply
2
Diagnostics LED on the receiver flashes red
Switch on transmitter / bring transmitter within the
receiver's range
3
Diagnostics LED on the receiver flashes alternately, red /
orange (siren monitoring has tripped)
Check fuse 5 and supply cable for the siren
4
Diagnostics LED on the receiver flashes alternately, two
times red / two times orange (relay monitoring has trip-
ped)
Check fuse 1 and relay outputs for short circuits (no volta-
ge may be applied if the output is inactive)
5
Diagnostics LED on the receiver flashes alternately, three
times red / three times orange (device malfunction)
Contact service
6
Status LED on the transmitter is off
Switch on transmitter / check the battery
7
Status LED on the transmitter flashes red (battery almost
empty)
Charge the battery
8
Operating level LED flashes red (no wireless response
received by receiver)
Check whether the receiver is switched on (diagnostics
LED) / bring the transmitter within the receiver's range.
Table: Eliminate fault states
