Balluff BAE PD-ML-010-04, Руководство пользователя

Страница: 54 / 76

16 english
6
Specific functions BML-S1G (continued)
6.1.1 BML parameters and functions
The following options are available to change the BML
configuration:
Parameters Options Note
Communication
protocol
BiSS/SSI Sets the type of
serial interface.
Sensor resolution Multiple
selection
options
Sets the resolution
of the sensor head.
Presets Normal All versions
Enhanced Only for BML with
additional 1 V
pp
output
Min. edge
separation
Multiple
selection
options
Sets the minimum
edge separation for
the quadrature
output. Only
together with
additional
quadrature interface.
BiSS/SSI coding Gray/Binary SSI mode
Binary (fixed) BiSS mode
BiSS/SSI output
value
Rising/falling SSI mode
RISING (fixed) BiSS mode
BiSS/SSI bit
length
Multiple
selection
options
SSI mode
32-bit (fixed) BiSS mode
BiSS/SSI frame
type
Standard or
diagnostics
For additional
information see
user’s guide
BML-S1G.
Tab. 6-1: Parameters BML-S1G
The BiSS/SSI frame type selection is available
with firmware version 308000_160914 or
higher.
The changes are only applied after the
Write
SySteM COnfiguratiOn
button has been
clicked, and the parameters have been written.
To avoid data loss and malfunctions, do not
remove the sensor head during an update
process.
6.1.2 BML parameter: Absolute quadrature
interface
Fig. 6-2: BML parameters
The following parameters are available to change the
configuration:
Parameters Options Note
VH request
Active/not
active
For additional
information see
user’s guide
Interfaces for BML
Magnetic Encoder
System
.
Z signal Standard/busy
Tab. 6-2: Parameter: Absolute quadrature interface
Requirement:
– Sensor head BML-S1G0- Q …
BAE PD-ML-010-04
Configuration Tool + USB-Adapter