Balluff BAE PD-ML-010-04, Руководство пользователя

Страница: 43 / 76

www.balluff.com 5 english
1.1 Validity
This guide describes the USB adapter as well as
installation and operation of the configuration software for
magnetic encoder systems. It applies to the following
series:
– BML-S1G…
– BML SL1…
– BML BM1/BM2…
Read this guide and the other applicable documents
completely before installing and operating the product.
Original user’s guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2023, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the rights of reproduction, distribution,
processing and translation.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3 Symbols and conventions
Instructions
are indicated by a preceding triangle. The
result of an action is indicated by an arrow.
►
Instruction 1
⇒ Result
Action sequences are numbered consecutively:
1.
Instruction 1
2. Instruction 2
Keys
are shown in angle brackets, e.g. “Confirm with
<Enter>”.
Key combinations are keys that must be pressed
simultaneously. They are connected with a plus sign, e.g.
<Ctrl> + <O>.
Buttons or selectable menu entries are written in italics
and small caps, e.g. W
rite
.
Menu commands
are joined with a greater-than sign,
e.g. “ S
ettingS
> O
ptiOnS
” stands for the Options
menu command from the
Settings
menu.
Note, tip
This symbol indicates general notes.
1.4 Scope of delivery
– USB adapter
with release code for the supplied USB adapter on the
part label
– BML sensor head cable
– BML sensor module cable
– USB cable
– Connector for BML sensor module
The associated Configuration Tool (software)
must be downloaded in the Internet at
www.balluff.com
or requested by sending an
email to service@balluff.de .
1.5 Approvals and markings
The CE Mark verifies that our products
meet the requirements of the current
EMC Directive.
Additional information on directives, approvals
and standards can be found at
www.balluff.com
on the product page.
1.6 System requirements
Installation requires administrator rights on the
PC.
– PC with 1 GHz CPU (single-core processor) or faster
(dual-core processor recommended)
– At least 1 GB RAM (32 bit) or 2 GB RAM (64 bit)
– At least 50 MB of available hard disk space
– USB 2.0 or higher
– Compatible with Windows 7, 8, 8.1, and 10 (32 bit and
64 bit)
1
Notes to the user
BAE PD-ML-010-04
Configuration Tool + USB-Adapter