Baby Lock Meridian 2 Скачать руководство пользователя страница 119

Страница: 119 / 132

TROUBLESHOOTING

117

PPE



After Embroidering

Thread is twisted.

—

Needle is turned, bent or the point is dull.

Needle is installed incorrectly.

There are scratches around the opening in the
presser foot.

There are scratches on the bobbin case.

Using improper needle or thread for the selected
fabric.

A bobbin designed specifically for this machine is
not used.

The thread is tangled on the wrong side of the fabric.

Upper threading is incorrect.

Using improper needle or thread for the selected
fabric.

The upper thread is too tight.

The bobbin thread is incorrectly installed.

Bobbin thread breaks.

Bobbin is set incorrectly.

Bobbin thread is incorrectly wound.

There are scratches on the bobbin or it doesn’t
rotate properly.

Thread is twisted.

—

A bobbin designed specifically for this machine is
not used.

Fabric puckers.

There is a mistake in the upper or bobbin
threading.

27, 28

Spool cap is set incorrectly.

Using improper needle or thread for the selected
fabric.

Needle is turned, bent or the point is dull.

Thread tension is set incorrectly.

The pattern is not embroidered correctly.

The thread tension is incorrect.

The thread is tangled, for example, in the bobbin
case.

111

Skipped stitches

Machine is threaded incorrectly.

Symptom, Cause/solution

Reference

Using improper needle, thread or the fabric
prepared insufficiently for embroidering.

31, 55,

Needle is turned, bent or the point is dull.

Needle is installed incorrectly.

Needle is defective.

Dust or lint has collected under the needle plate.

111

Not embroidering

Needle is turned, bent or the point is dull.

Bobbin is set incorrectly.

Upper threading is incorrect.

High-pitched sound while embroidering

Pieces of thread are caught in the race.

111

Upper threading is incorrect.

A bobbin designed specifically for this machine is
not used.

There are needle holes or friction scratches in the
bobbin case.

111

The needle contacts the needle plate.

The needle clamp screw is loose.

Needle is turned, bent or the point is dull.

The handwheel feels sluggish when it is turned.

Thread is tangled in the bobbin case.

111

Symptom, Cause/solution

Reference

Thread tension is incorrect.

Upper threading is incorrect.

Bobbin is set incorrectly.

Using improper needle, thread or the fabric
prepared insufficiently for embroidering.

31, 55,

Thread tension is set incorrectly.

Bobbin thread is incorrectly wound.

Needle is turned, bent or the point is dull.

A bobbin designed specifically for this machine is
not being used.

The pattern is not embroidered correctly.

Thread is twisted.

—

Thread tension is set incorrectly.

Symptom, Cause/solution

Reference

Содержание Meridian 2





































































































































Результаты поиска

Содержание Meridian 2

Отзывы:

Похожие инструкции для Meridian 2

Бренды по названию

Популярные бренды

Baby Lock Meridian 2, Инструкция и справочник

Результаты поиска

Содержание Meridian 2

Отзывы:

Похожие инструкции для Meridian 2

Бренды по названию

Популярные бренды