Baby Lock Meridian 2, Инструкция и справочник

Страница: 80 / 132

MAKING EMBROIDERY ADJUSTMENTS
78

Upper Thread Is Too Loose
The tension of the upper thread is too loose, resulting in a
loose upper thread, loose thread locks, or loops appearing
on the right side of the fabric.
Touch in to tighten the upper thread
tension. (The tension number will increase.)
 Adjusting Overall Upper Thread Tension
When embroidering, if the overall tension of the upper
thread is too tight or too loose, adjust it from the setting
screen. The selected setting will be applied to all patterns.
If an individual embroidery pattern needs additional fine
tuning, refer to “Adjusting Thread Tension” on page 77.
a
Touch .

The settings screen appears.
b
Touch .

The embroidery settings screen appears.
c
Display [Embroidery Tension] in the embroidery
settings screen.
d
Use to adjust the upper thread tension.
* : Tighten the upper thread tension.
* : Loosen the upper thread tension.
e
Touch .
Adjusting the Bobbin Case
The bobbin case can be easily adjusted when bobbin tension
changes are required to accommodate different bobbin
threads. Refer to “Embroidering Attractive Finishes” on page
67.
To adjust the bobbin tension for embroidery function, using
the bobbin case, turn the slotted screw (-) with a (small)
screwdriver.
1
Do not turn a phillips screw (+).
2
Adjust with a screwdriver (small).
 Correct Tension
Upper thread slightly appears on the wrong side of fabric.

Bobbin Thread Is Too Loose
Bobbin thread appears slightly on the right side of fabric.
If this occurs, turn the slotted screw (-) clockwise, being
careful not to over-tighten the screw, approximately 30-45
degrees to increase bobbin tension.
Note
• If the upper thread was incorrectly threaded, the
upper thread may be too loose. In this case, refer
to “Upper Threading” on page 28 and rethread the
upper thread.
1
Right side
2
Wrong side
1
Right side
2
Wrong side
1
Right side
2
Wrong side
a
b