Baby Lock Meridian 2 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 132

background image

1

Thank you for purchasing this machine. Before using this
machine, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS”, and then study this manual for the
correct operation of the various functions.
In addition, after you have finished reading this manual,
store it where it can quickly be accessed for future
reference.

Please read these safety instructions before attempting to
use the machine.

DANGER

- To reduce the risk of electric shock

1

Always unplug the machine from the
electrical outlet immediately after using,
cleaning, making any user servicing
adjustments mentioned in this manual,
or if you are leaving the machine
unattended.

WARNING

- To reduce the risk of burns, fire, electrical shock, or
injury to persons.

2

Always unplug the machine from the electrical

outlet, or when making any adjustments mentioned
in the instruction manual.

• To unplug the machine, switch the machine to the

symbol “O” position to turn it off, then grasp the
plug and pull it out of the electrical outlet. Do not
pull on the cord.

• Plug the machine directly into the electrical outlet.

Do not use an extension cord.

• Always unplug your machine if there is a power

failure.

3

Electrical Hazards:

• This machine should be connected to an AC power

source within the range indicated on the rating
label. Do not connect it to a DC power source or
inverter. If you are not sure what kind of power
source you have, contact a qualified electrician.

• This machine is approved for use in the country of

purchase only.

4

Never operate this machine if it has a damaged cord

or plug, if it is not working properly, has been
dropped or damaged, or water is spilled on the unit.
Return the machine to the nearest authorized Baby
Lock retailer for examination, repair, electrical or
mechanical adjustment.

• While the machine is stored or in use if you notice

anything unusual, such as an odor, heat,
discoloration or deformation, stop using the
machine immediately and unplug the power cord.

• When transporting the machine, be sure to carry it

by its handle. Lifting the machine by any other part
may damage the machine or result in the machine
falling, which could cause injuries.

• When lifting the machine, be careful not to make

any sudden or careless movements, which may
cause a personal injury.

5

Always keep your work area clear:

• Never operate the machine with any air openings

blocked. Keep ventilation openings of the machine
free from the build up of lint, dust, and loose cloth.

• Never drop or insert foreign object into any

opening.

• Do not operate where aerosol (spray) products are

being used or where oxygen is being administered.

• Do not use the machine near a heat source, such as

a stove or iron; otherwise, the machine, power cord
or garment being embroidered may ignite, resulting
in fire or an electric shock.

• Do not place this machine on an unstable surface,

such as an unsteady or slanted table, otherwise the
machine may fall, resulting in injuries.

INTRODUCTION

IMPORTANT SAFETY
INSTRUCTIONS

«
1
2
3
4
5
...
»

Содержание Meridian 2





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Meridian 2

Бренд: Fellowes Страницы: 4

Бренд: Nagel Страницы: 36

Бренд: National Instruments Страницы: 18

Бренд: Singer Страницы: 15

Бренд: Contec Страницы: 13

Бренд: AMERICAN SNIPER Страницы: 8

Бренд: Oki Страницы: 154

Бренд: Duerkopp Adler Страницы: 38

Бренд: Yamato Страницы: 40

Бренд: Baby Lock Страницы: 33

Бренд: Muratec Страницы: 91

Бренд: Kärcher Страницы: 240

NC81200 CLASSES

Бренд: Carpet Sergers Страницы: 30

Бренд: Hefter Страницы: 71

DDL-9000C-F Series

Бренд: JUKI Страницы: 138

Бренд: JUKI Страницы: 70

AMS-210ENHL2210/TF10S

Бренд: JUKI Страницы: 293

Бренд: Husqvarna Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды