PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION
| PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION
24
- GPI Status
- GPO Status
As regards the
Opto Interface port pinout
see the Appendix at the end
of this manual. For the operation of each GPI and GPO see the
specific section in the next pages of this manual.
5
ANALOG OUTPUT
Electronically balanced analog audio output of the second hybrid, on
Balanced XLR connector, Mono type. The two connectors presents
the same-same signal in outputs.
6
ANALOG INPUT
Input of telephone Hybrid, with electronically balanced XLR
connection. This input is for the signal to be sent to the interlocutor via
the telephone line. The signal must be of the Mix-Minus type.
7
LINE-1
GSM-SET-LINE
Double RJ11 6/4 connector to connect the PSTN/POTS telephone line
to the telephone Hybrid n°2 (LINE socket) and to connect a telephone
device in parallel to the hybrid (SET) used, for example to dial the
number to call or to answer an incoming call.
The GSM connector is a connector for audio interface with external
GSM device for telephone Hybrid n°1. The pinout of this connector
cam be found in the technical appendix of this manual.
8
POWER SUPPLY UNIT
Switch with on/off light. The switch-power socket unit is fitted with a
fuse drawer that contains the power supply fuse and a spare one with
the same characteristics: a retarded 2000 mA for 230V mains voltage.
