TELEPHONE HYBRID REMOTER DETAIL
| TELEPHONE HYBRID REMOTER DETAIL
45
DIAL:
when DIAL is pressed the DTMF dialler opens. Dial
the number using the numerical keyboard of your PC and
then click ON HOOK. In this way the DTMF dials the
number to be called on the telephone line. The Latest 10
Calls section displays the last ten calls; click SAVE to
permanently save a telephone number. To recall a number
double click on it.
Use the right button of the mouse to delete a number
(Delete Row #1) or all the numbers(Delete All) from the list
of the Latest 10 calls.
The lower section displays the device statuses and any
audio functions enabled.
INPUT SOURCE:
this shows which source is connected to the PhoneX input. Those
available are: Analog, Digital Left, Digital Right and Microphone.
The section below the Input Source shows if the “
Limiting
” and “
Ducking
” controls are
enabled. The Line Status section displays the status of the
Ring
,
Echo Canceller
and
Denoiser
controls.
14.8 HYBRID 2 SECTION
The Hybrid 2 section features the same controls as the Hybrid 1 section. As
regards the Conferencing function the Hybrids can be enabled by accessing
Setup -> Outputs
and flagging “Conference”
14.8.1 Special notes concerning Ducking/Conference
between Hybrids
If more than one PhoneX device is connected in cascade to obtain up to 8
telephone lines, we recommend DISABLING the Ducking function on the various
devices connected to each other in order to avoid unpleasant sound effects.
14.9 LEVELS SECTION
The levels section shows the PhoneX Input and Output levels of both telephone lines of each
hybrid. The Operative Mode area shows whether the PhoneX device is operating in
SINGLE
mode, i.e. used as telephone hybrid for each single telephone line, or in
CONFERENCE
, i.e.
sending to Telephone Hybrid 2 (
send
) what is received from Telephone Hybrid 1 (
receive
) and
sending to Telephone Hybrid 1 (
send
) what is received from Telephone Hybrid 2 (
receive
).
In this mode an audio signal can always be sent via the
SEND
input to both interlocutors. The
audio signal that comes, for example, from the
TELCO
channel of the mixer, which sends all
the mixer console’s audio signals,
WITHOUT
what arrives from the telephone channel, i.e. the
RECEIVE
. In this way an audio-loop with the telephone device is avoided.
14.10
GPI / GPO STATUS SECTION
The GPI / GPO Status section shows the status of the General Purpose Input and Output status. The 25 pin female
SubD port on the back of the device is used to connect the device; see the technical appendix for the connections and
the pinout.
