TECHNICAL APPENDIX
| TECHNICAL APPENDIX
77
16.5.5 DTMF Remote commands
Into the Program Settings section it is possible to find a special section designed for GPO and DTMF Decoder
If the Checkbox DTMF Decoder is selected, PhoneX introduce a control and a DTMF decoder over the line numer ONE,
into PhoneX D1 and over the line number ONE also in PhoneX D2 in the Receive side. In case a DTMF is recognized,
an action is taken by the PhoneX, as a GPO closure. Please refer to the below table to get the correspondence between
action and DTMF String.
String
Action
#1
GPOutput 1 Closure
#2
GPOutput 2 Closure
#3
GPOutput 3 Closure
#4
GPOutput 4 Closure
String
Action
#1
GPOutput 1 Open
#2
GPOutput 2 Open
#3
GPOutput 3 Open
#4
GPOutput 4 Open
16.5.6 Parser Ascii over Serial Port and Ethernet
An ASCII Parser is available over the Serial Port and the Ethernet Port to get the following commands.
H1, H2 (Hybrid identifier)
DIAL Number,
ATT,
HOLD,
HOOK ON,
HOOK OFF (command)
The Parser replys SYNTAX ERROR or CMD OK.
Example 1:
H1 DIAL 0,3346789
CMD OK
Execution:
Call 3346789 by using the external line via PBX with a pause
“,” via Hybrid-1
Example 2:
H2 HOOK ON
CMD OK
Execution:
Close the Line -2
Ethernet Port
Parser Ascii over UDP, same string and Syntax. UDP port :15000.
