TELEPHONE HYBRID REMOTER DETAIL
| TELEPHONE HYBRID REMOTER DETAIL
42
14.5.3 Program Settings Section
The Program Settings section shows all the functions of the PhoneX Remoter Control Software and of the PhoneX D1
device.
Visualisation and Program Features
: The “Show peak meter” checkbox offers the possibility to see the peak meter on
the levels section of the two Hybrids.
Setup Password:
This field is used to enter an alphanumeric Password of maximum 8
digits, which is required to access the device Setup section. Enter the password and click
Return. This password must be entered in the User Authentication box to access the
Setup section. If you forget the password the device must be returned to the
manufacturer in order to be used again. There are no ba
ckdoors and Axel Technology’s
Technical Assistance Service is not authorised
to instruct others to tamper with the device.
Information & Connection Information :
This panel
provides a summary of the PhoneX model in use, the
name of the device, the firmware version installed on the
DSP of the device and the univocal firmware code
assigned to each single device. The Copy Firmware code
to Clipboard key is used to save the Firmware code in the
notebook, so that this alphanumeric code can be sent to
Axel technology to execute Upgrades or improve the
product. The Connection Information box shows the type of
connection in use. It can be Serial or TCP/IP, and the IP
and Port values are also shown.
.
Country Line Setup:
Select the country in which PhoneX is
installed from this list. This parameter is important for the
configuration of the impedance set inside the PhoneX, which
will change and adapt the input telephone line with the line
provided in the country in which PhoneX is installed.
CPTD Signal Characteristics:
the
Call Progress Tone Detector
it’s a special PhoneX D1 feature that recognize if a
phone calling is finished or not. Each country line has a different CPTD signal, please select from the available list of
Charactheristic the correct one that belong to the country where the PhoneX D1 is installed
DTMF Decoder:
by flag this checkbox the PhoneX D1 is allowed to recognize from the Line -1 a DTMF signal, and take
action in case there is a setup for it.
