TECHNICAL SPECIFICATION PHONEX D1
– PHONEX D2
| TECHNICAL SPECIFICATION PHONEX D1
– PHONEX D2
80
18
TECHNICAL SPECIFICATION PHONEX D1 – PHONEX D2
GENERAL
VALUE
Dimension
434x351x44mm (1 rack unit)
AC Rate
230Vac / 110Vac 50 Hz / 60 Hz 30VA
Type of power supply
Switching power supply
Processing architecture
Fully digital, based on DSP 24bit/100Mhz. Signal processing is performed by phase
linear filter
Weight
≈ 5 Kg
Operating Temperature
-5°C / +50°C
Compliance
ETSI TBR21, FCC Part68, ICASA, ACAM, AS/ACIF S002, NALTE YD514
ANALOG INPUT MODULE (send)
A/D Conversion
24bit Sigma-Delta Conversion (Crystal CS4272)
Connectors:
XLR, female - Electronically balanced
AD Clipping Point
+20.0dBu
Operative Nominal Level:
From –12.0dBu to +12.0dBu (0.1dBu Step)
Line Impedance
600 Ω/ 10 kΩ (Electronically balanced selectable) EMI–suppressed
Distortion:
less than 0.01% TDH+NOISE (0.0dBu 1Khz)
AD Dynamic Range:
108 dB RMS (110 dB A weighted)
Input Modes:
Mono
Microphone Impedance
10 kΩ
Microphone gain
+10dB to +50dB
DIGITAL INPUT MODULE (send)
Connectors:
XLR, female – Electronically balanced
Format
AES3/EBU
Sample rates
32 kHz / 44.1 kHz / 48 kHz / 64 kHz / 88.2 kHz / 96 kHz with src and jitter correction
Operative Nominal level:
From 0.0 dBFs to -24dBFs (0.1 dBu step)
Dynamic Range:
125 dB (Typ), 122 dB (Min)
Distortion
less than 0.01% TDH+NOISE (0.0dBu 1Khz)
Input Modes:
Mono
ANALOG OUTPUT MODULE
(receive)
D/A Conversion
24bit Sigma-Delta Conversion (Crystal CS4272)
Connectors
XLR, male - Electronically balanced
Output Level
-12.0dBu to +14.0dBu (0.1dBu Step) – Max (+19dBu)
Impedance Source
10 Ω
Load Impendance
600 Ω or greater
Distorsion
Less than 0.01% TDH+NOISE (0.0dBu @ 1Khz)
TELEPHONE MODULE land line
Connectors “LINE”
RJ 11 6/4 socket
Connectors “SET”
RJ 11 6/4 socket
Bandwidth telephone line
100Hz – 5kHz, -3dB @ 1 kHz
Telephone line Impedance
Nominally 600 Ω
Isolation
3 kV
TELEPHONE MODULE GSM
Module
Type
Quad-Band GSM 850/900/1800/1900 Mhz
Operating temperature
-30°C ≈ +75°C
Dimensions
90 x 130 x 38 mm
Weight
< 190 g
Supply voltage range
From 8 to 30Vac
Power consuption @12V
Power down 0.5mA, Sleep mode 29mA, Speech mode 184mA
Antenna Interface
SMA 50 Ω
REMOTE INTERFACE
Digital Inputs GPIn
4x GP In optocoupled
Digital Outputs GPOut
4x GP Out Open Collector optoisolated