PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION
| PHONEX D1 AND PHONEX D2 GENERAL DESCRIPTION
26
9.4 PHONEX D2 REAR PANEL
N°
NOME CONTROLLO
FUNZIONE
1
DIGITAL I/O
Digital AES3/EBU audio input on balanced XLR connector with 110Ω
impedance. Digital AES3/EBU audio output on balanced XLR
connector with 110Ω impedance, in PhoneX D2 the inputs are divided
as following:
1C
– Hybrid 1 Input
2D
– Hybrid 2 Input
2
“USB” PORT
+
ETHERNET PORT
(opz)
PhoneX D2 allows to be connected to PC via USB port. Before
connect the USB A/B from the PC to the PhoneX D2, please install the
Axel Telephone Hybrid Remoter that install also the USB driver into
the OS.
PhoneX D2 is fitted with an Rj45 Ethernet port to monitor and control
the device. This port can also be used to control the Web Browser
and as SNMP agent.
(optional)
3
SERIAL 1
– RS232
SERIAL PORT -1
PhoneX D2 provides up to 2 serial ports to control the device via
remote control software. The Axel Telephone Hybrid Remoter control
software can be used to change the operating parameter, while
PhoneX Address Manager can be used to set the values of the
TCP/IP card, the Target Name (or device name) and the access
password for SNMP communication. The Target ID can also be set
and the Front panel locked.
Serial Port 1 can also be used to
reprogram the firmware
and to
connect the device to an external
56K analog modem
(for remote
control using the phone line). Default port speed is set at 38,400bps
