TELEPHONE HYBRID REMOTER DETAIL
| TELEPHONE HYBRID REMOTER DETAIL
46
14.10.1
GPI status function
HOOK 1:
this is used to hook, by means of a stable contact, the telephone line of Hybrid
1
; it is usually connected to the
TELCO (N-1)
modules of the Broadcast Mixing consoles that feature a
GPO
contact to answer incoming calls directly
from the telephone fader.
ATTEN1:
The closure of this GPI, corresponds to the execution, by the PhoneX, of the
ATTEN
command available via
REMOTER control software or via web page; in other words “
a dB reduction equal to the Ducking value set in the control
software is applied to the Receive signal”
. A connection to the
GPOs
provided by the mixing consoles or by commands
made available to the broadcast technician or director of a programme on air, if the audio received needs to be
attenuated. This is not a profanity delay.
HOOK 2:
this is used to hook, by means of a stable contact, the telephone line of Hybrid 2; it is usually connected to the
TELCO (N-1)
modules of the Broadcast Mixing consoles that feature a
GPO
contact to answer incoming calls directly
from the telephone fader
.
ATTEN2:
The closure of this GPI, corresponds to the execution, by the PhoneX, of the
ATTEN c
ommand available via
REMOTER control software or via web page; in other words “a dB reduction equal to the Ducking value set in the control
software is applied to the Receive signal”. The connection to the GPOs provided by the mixing consoles or by commands
made available to the broadcast technician or director of a programme on air, is useful if the audio received needs to be
attenuated. This is not a profanity delay.
14.10.2
GPO status function
HOOK 1:
this is used to monitor the hooking of the telephone line of the Hybrid
1;
it is monitored through the display of
the status via the remoter software and the web page and by means of the closure of a stable relay contact. It is usually
connected to the
TELCO (N-1)
modules of the Broadcast Mixing console which provide a GPI input to display (by the
lighting up of the relevant LED) the presence of an incoming call on the
TELCO
module.
RING1:
the closure of this relay corresponds to the receipt of a telephone call. It remains closed throughout the RING
phase and reopens when the alternated RING TONE phase ends. When the call is answered the RING ends and the
HOOK1 relay contact is closed.
HOOK 2:
this is used to monitor the hooking of the telephone line of the Hybrid 2
;
it is monitored through the display of
the status via the remoter software and the web page and by means of the closure of a stable relay contact. It is usually
connected to the
TELCO (N-1)
modules of the Broadcast Mixing console which provide a GPI input to display (by the
lighting up of the relevant LED) the presence of an incoming call on the
TELCO
module
.
RING2:
the closure of this relay corresponds to the receipt of a telephone call. It remains closed throughout the RING
TONE phase and reopens when the alternated RING TONE phase ends. When the call is answered the RING ends and
the HOOK2 relay contact is closed.
14.11
SETUP SECTION
The SETUP section is the most important area for the configuration of the PhoneX. From this
section it is possible to configure all the operating modes of the Hybrids 1 and Hybrids 2. The
SETUP section is divided into four sub-menus:
5. Hybrid 1
6. Hybrid 2
7. Outputs
8. Program Settings
14.11.1
Hybrid 1 section
In this section all the parameters relating to the Telephone Hybrid 1 (
Hybrid 1
) can be set
