USE OF TELEPHONE HYBRID REMOTER
| USE OF TELEPHONE HYBRID REMOTER
31
12
USE OF TELEPHONE HYBRID REMOTER
Start window of the PhoneX control software
12.1
ACCESS VIA SERIAL CONNECTION
To operate on the PhoneX, after having allocated the serial port and
TCP/IP values it is necessary to use the PhoneX Remoter program by
clicking the special icon. The window below shows the PhoneX and
PC connection via Rs232 serial port.
As can be seen, a USB connection is being used on the
COM5
port of
the PC in use. The USB connection is the fastest one to set up;
connect the Pin-to-Pin serial cable or the USB A/B cable supplied in
the PhoneX box and click
CONNECT
; the control panel for the
management of the device will appear. For a network connection
(TCP/IP) see the next chapter
Click Connect to establish a communication between the PhoneX Remoter and PhoneX; all the information concerning
the device’s memory, status and operating mode is displayed. The control panel will change format and display all the
necessary controls to operate the device. The various controls are explained in detail in the next chapters