Avaya ERS 8600 series, Руководство по настройке

Страница: 350 / 420

Variable Value
AreaId A read-only field indicating the 32-bit integer that uniquely identifies an
area. Area ID 0.0.0.0 is used for the OSPF backbone.
Type A read-only field indicating the OSPF interface type. By default,
switches can determine this value from the corresponding value of
ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, use the
value broadcast; X.25 and similar technologies use the value nbma;
and point-to-point links use the value pointToPoint.
RouterId A read-only field indicating the 32-bit integer that uniquely identifies the
router in the autonomous system.
Lsid A read-only field indicating that the link-state ID is an LS type-specific
field containing either a router ID or an IPv6 address. It identifies the
piece of the routing domain described by the advertisement.
Sequence A read-only field indicating that the sequence number is a signed 32-
bit integer that identifies old and duplicate link-state advertisements.
Age A read-only field indicating the age in seconds of the link-state
advertisement.
Checksum A read-only field indicating the checksum of the complete contents of
the advertisement, except the age field. The age field is not included so
that the advertisement age increments without updating the checksum.
The checksum used is the same for Industry Standards Organization
(ISO) connectionless datagrams, the Fletcher checksum.
TypeKnown A read-only field indicating the LSA type recognized by this router.
Viewing characteristics in the AS-scope link-state database
View the characteristics of the autonomous system (AS)-scope link-state database.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6 .
2. Double-click OSPF .
3. Click the AS-scope LSDB tab.
Variable definitions
Use the data in the following table to use the AS-scope LSDB tab.
Common procedures using Enterprise Device Manager
350 Configuration — IPv6 Routing November 2010