Avaya ERS 8600 series, Руководство по настройке

Страница: 170 / 420

Variable Value
seconds is the number of seconds between hello
packets sent on this interface. The range is 1–
65535. The default is 10.
Important:
When you change the hello interval values, you
must save the configuration file and restart the
switch to restore the values and check for
consistency.
info Displays OSPF characteristics on the port.
metric <metric> Configures the OSPF metric for the interface. The
switch advertises the metric in router link
advertisements.
metric is the range 0–65535.
poll-interval <seconds> Configures the polling interval for the OSPF
interface in seconds.
seconds is 0–214783674.
ports Specifies the port or range of ports you configure
in the format slot/port.
priority <priority> Configures the OSPF priority for the interface
during the election process for the designated
router. The interface with the highest priority
number is the designated router. The interface
with the second-highest priority becomes the
backup designated router. If the priority is 0, the
interface cannot become either the designated
router or a backup. The priority is used only during
election of the designated router and backup
designated router. The range is 0–255. The
default is 1.
retransmit-interval <seconds> Configures the retransmit interval for the OSPF
interface; the number of seconds between link-
state advertisement retransmissions.
seconds is an integer 1–1800.
transit-delay <seconds> Configures the transit delay time for the OSPF
interface, the estimated time, in seconds,
required to transmit a link-state update packet
over the interface.
seconds is an integer 1–1800.
Procedure steps
Configure port-based OSPF by using the following command:
IPv6 routing configuration using the CLI
170 Configuration — IPv6 Routing November 2010