Avaya ERS 8600 series, Руководство по настройке

Страница: 187 / 420

Variable Value
area <A.B.C.D> Specifies the area IP address (0.0.0.0 to
255.255.255.255) {a.b.c.d}.
cost <metric> Configures the OSPF metric for the interface. The
switch advertises the metric in router link
advertisements.
metric is the range 0–65535.
To configure this option to the default value, use the
default operator with the command.
The default value is 1.
dead-interval <seconds> Configures the OSPF dead interval for the interface.
seconds is the number of seconds the switch OSPF
neighbors wait before determining that this OSPF
router is down. The range is from 1-4095. This value
must be at least four times the Hello interval value. The
default is 40.
To configure this option to the default value, use the
default operator with the command.
hello-interval <seconds> Configures the OSPF hello interval for the interface.
seconds is the number of seconds between hello
packets sent on this interface. The range is 1–
65535. The default is 10.
Important:
When you change the hello interval values, you
must save the configuration file and reboot the
switch for the values to be restored and checked for
consistency.
To configure this option to the default value, use the
default operator with the command.
network <value> Configures the type of interface:
• eth: broadcast
• nbma: NBMA
• p2mp: point-to-multipoint
• p2p: point-to-point
poll-interval <seconds> Configures the polling interval for the OSPF interface
in seconds.
seconds is 0–2147483647.
To configure this option to the default value, use the
default operator with the command.
The default value is 120.
priority <value> Configures the OSPF priority for the interface during
the election process for the designated router. The
interface with the highest priority number is the
designated router. The interface with the second-
Configuring an OSPF interface
Configuration — IPv6 Routing November 2010 187