Autonics PMC-1 HS, Руководство пользователя

Страница: 41 / 82

5. Drive by PC
38
© Copyright Reserved Autonics Co., Ltd.
5.2 Main Screen
Run the operation program to display the main screen. On this screen, you can execute;
● JOG operation on each axis(scan, continuous and pre-set)
● Execution of Home Search, Index drive and program
● SAVE and OPEN of operation mode, parameters and program files
① Main body connection status
If the screen displays on-line, the program is being connected to the main body and serial communication.
If off-line, it is not connected to the main body but you can write the operation program.
In off-line, you can read files from the hard disk by means of Open or Save from the File menu and
save the written program.
②
Selecting JOG mode
You can operate JOG in three ways on the main screen.
Display Operation Handling item
Scan Scan Only drives while you press the direction button.
Continuous Continuous
Start to drive if you press the direction button and continue
to drive until you press the stop button.
Preset pre-set Drives as many as the Preset Value movement if you press the direction button.
③ Selecting drive speed
This function selects the drive speed of JOG operation. Speed 1~4 means the drive 1~4 configured on the
parameter screen. Speed 5 means the speed configured as speed5 on the screen.
The speed can be changed in driving.
②
⑩
④
①
⑦
⑪
⑧
③
⑨
⑥
⑤