39
Use the DNA 1 to listen to high quality 2-channel sources and streaming
audio. If you would like to use your home cinema system, activate the
By-Pass Mode of the DNA 1 and use your home cinema preamplifier as
usual.
Important
·
Please read the complete section about the special function
By-Pass Mode first before you use this function in order to
prevent incorrect usage and possible damage to your audio
system and/or hearing.
·
By factory default no input channel is selected for the
By-Pass Mode. Use this menu option to select desired input
channel for the By-Pass Mode.
When the By-Pass Mode is active the volume control of the DNA 1 is by-
passed. The DNA 1 passes through the input signal to the outputs and
amplifiers with its
full
level.
The special function By-Pass Mode of your DNA 1 is activated
automatically if you switch to the input channel selected for
By-Pass Mode in the setup option "
Set input channel for By-Pass
Mode
". The signal at the input channel selected for By-Pass Mode
operations is passed through the DNA 1 at a level of 0 dB (i.e. no change
in volume level) to the outputs and amplifiers. As soon as you select a
different input channel, the special function By-Pass Mode is switched
off automatically, and the DNA 1 resumes the last volume setting.
Important
·
Please check the correct connection and setup before you use the
By-Pass Mode for the first time. The input signal will be passed
through to the outputs at full level!
As soon as the By-Pass Mode is activated, the DNA 1 will ignore all
control commands coming from the keys on the front panel or remote
control (exceptions see below)!
Important
There are only two possibilities to disable the By-Pass Mode:
1.
Select a different input channel. The DNA 1 switches to the newly
selected input channel, resetting the volume to its prior level.
2.
Push the
power
key on the front panel or the button
PRE
on the
Audionet Metal Remote Control
RC 2
. The DNA 1 switches off to
stand-by mode.
