61
8.5.2 Reset Network Module
Press and hold key
set
on front panel or use key
ä
of the Audionet Metal
Remote Control
RC 2
to enter the main menu of your DNA 1. Select the
menu item
Factory Default Reset
by using the
up
/
down
keys on
the front panel or keys
▲
/
▼
of the remote control. Confirm your
selection by pressing the
OK
key or press the
set
key on the front panel
shortly.
Now select the menu item
Reset Network Module
. Confirm your
selection by pressing the
OK
key or press the
set
key on the front panel
shortly.
Press
up
at the front panel or the
►
on the remote control to start the reset
procedure reverting all settings to the factory default values. After
completing the reset procedure the DNA 1 will power down and then
perform a restart.
Important
·
After resetting the network module the connection to your network
might be lost and will only be established again if you enter the
correct network configuration.
·
During rest of the network module the progress bar will pause at
several positions. This is the normal behaviour of the reset procedure
and no sign of malfunction.
►
RESET NETWORK MODULE
◄
Press Up or
„
to
Reset Network Module
