43
Tip
·
For a more comfortable access, use the directional keys
◄
/
►
on the
Audionet Metal Remote Control
RC 2
(see section
"7 -
Audionet
Metal Remote Control RC 2
"
on page 27). Acknowledge your
selection with the
OK
key.
8.4
Network setup
Your DNA 1 is set to receive DHCP
*
information from your network. If
you connect your device to a wired network, it should be ready to use.
For use of fixed IP address you may contact your network administrator
to get the information you need to setup the DNA 1 correctly for your
network.
Use keys
up
/
down
on the front panel or keys
▲
/
▼
of the Audionet
Metal Remote Control
RC 2
to alter the character marked by the cursor.
Press and hold
set
for longer than 2 seconds or press key
►
to move the
cursor one position to the right. Key
◄
moves the cursor one position to
the left. To erase the character marked by the cursor use key
O
. To finish
editing, press
set
or
OK
.
Note
·
You will find a step-by-step example for network configuration at the
end of the section (see section:
"8.4.10 - Example for Network
setup" on page 56
). Most network related terms are defined in the
glossary (see section:
"10.1 - Glossary" on page 64
).
*
see section:
"10.1 - Glossary" on page 88
Symbol
Marker
Preferences
Postition
►
Manage Network
◄
Connection Type
DHCP
1 of 4
