11
·
The DNA 1 is a Class I unit and must be earthed. Please ensure a
stable earth connection. Phase (hot pin) is marked on the back panel
phase
9 .
·
If you connect the mains cord please make sure that the mains switch
10 on the back panel is switched off.
·
Never pull the mains plug while the DNA 1 is switched on! Before
you pull the mains cord off its socket 8 on the back panel, power
down the unit to stand-by mode using
power
key, and switch off the
unit using mains switch 10 .
Only in cases of extended absence – like vacations – or if massive trouble
on the mains power grid is to be expected you should switch off the
DNA 1 from the mains using mains switch 10 . Then, to disconnect the
unit completely from mains power grid, pull the mains plug.
Tip
·
The use of high quality mains cords can improve sound quality. Ask
your local dealer for more information.
4.3
Orientation of mains plug
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord so that the hot pin of the wall
outlet is connected to the pin of the mains input 8 marked
phase
9 .
Your Audionet DNA 1 is able to detect a wrong polarization of the mains
plug during start-up. If the message
appears in the display, switch off the unit and flip the mains plug in the
wall outlet (see section
"6.1.3 - Mains phase detection" on page 18
).
►
Attention:
◄
►
Mains phase incorrect
◄
