10
4
Installation and power supply
Important
·
During connecting and removing of sources or amplifiers to the
DNA 1 all units of your audio system have to be switched off to
prevent damage of the DNA 1 or any of the other connected units.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut cables could damage the DNA 1
and/or any other connected unit.
4.1
Placement
Important
·
It is recommended to place the DNA 1 into a high quality rack or
onto a stable table.
·
Do not expose the unit to direct sunlight.
·
Do not cover the ventilation slots.
·
Do not place the DNA 1 in close range to heat sources like radiators.
·
Do not place the DNA 1 on top of other units, especially not on top of
power amplifiers, preamplifiers or similar devices that produce heat.
Both units could suffer damage from thermal overload.
·
Do not place other units on top of the DNA 1. Both units could suffer
damage from thermal overload.
·
Do not use the unit in places where it is exposed to vibrations.
·
Do not place the unit close to loudspeakers or into the corner of a
room where it is exposed to high levels of sonic energy, which might
reduce the sound quality of the unit.
4.2
Mains connection
The mains input 8
*
is on the back panel of the DNA 1. To connect the
device to mains use the included mains cord. If you prefer to use a different
power cord make sure that it meets the specifications for your home country.
Important
·
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
*
see numbers in section
"3 - Overview back
panel" on page 88
.
