33
8.2
Select input
Push the
set
key on the front panel once for less than two seconds or push
the key
ä
on the Audionet Metal Remote Control
RC 2
to enter the
Select Input
menu item. Then select the desired input channel with
the keys
up
and
down
or with the keys
◄
/
►
on the remote control. In
the display you see the selected input channel, channel number and your
chosen channel name. Press
set
or
OK
to actually switch to the selected
channel.
Overview of DNA 1 input channels:
No.
Inputs
Signal
see
3 - Overview back
panel on page 9
1
D1
Digital (electrical)
Digital Inputs
IN 1
17
2
D2
Digital (optical)
Digital Inputs
IN 2
16
3
NET
Stream, USB, Internetradio
Network 15 14 13
4
USB
USB Audio In
USB Audio 18
5
AN1
Unbalanced Line/ Phono
Analog Inputs
IN 1
1-2
6
AN2
Unbalanced Line
Analog Inputs
IN 2
1-2
7
AN3
Unbalanced Line
Analog Inputs
IN 3
1-2
The DNA 1 features a soft input selection. During the switching of
inputs, first the volume is stepped down to –80 dB, followed by switching
off the outputs. Now the input section switches to the new input channel.
Afterwards the outputs are switched on again, and finally the volume is
stepped up to its original level.
Note
·
A '*' beside the channel name indicates the input which is dedicated
to the By-Pass Mode (see section
"8.3.5 - By-Pass channel"
on page
38).
