37
8.3.4 Auto start
disabled
The Auto Start function is disabled. After switching on
the mains switch 10 on the back panel, the DNA 1
enters the stand-by mode. You have to use the
power
key
on the front panel or the key
DNx
on the Audionet Metal
Remote Control
RC 2
to switch on the unit into normal
operating mode.
active
The Auto Start function is active. As soon as you connect
the DNA 1 to mains (i.e. use the mains switch 10 on the
back panel) the unit starts up automatically to normal
operating mode. Use this setting for timer controlled
operations.
Tip
·
For a more comfortable access, use the directional keys
◄
/
►
on the
Audionet Metal Remote Control
RC 2
(see section
"7 -
Audionet
Metal Remote Control RC 2
"
on page 27). Acknowledge your
selection with the
OK
key.
►
SET AUTO START
◄
Auto Start is disabled
Auto start
adjustment
Title
