42
8.3.8 Channel name
You can assign a fully user-definable name up to 12 characters in length
to each of the thirteen input channels. The display shows the number of
the currently selected input channel and the assigned channel name. The
cursor marks the character you now may alter.
Use keys
up
/
down
on the front panel or keys
▲
/
▼
of the Audionet
Metal Remote Control
RC 2
to alter the character marked by the cursor.
Press and hold
set
for longer than 2 seconds or press key
►
to move the
cursor one position to the right. Key
◄
moves the cursor one position to
the left. To finish editing the channel name press
set
or
OK
.
Note
·
For easier editing of the channel name use the software Audionet
RCP (see user's manual RCP).
·
All settings apply to the currently selected input channel.
8.3.9 Volume offset
To offset differences between input devices, you can adjust the volume
level for each channel in range from -9dB to +9dB.
►
VOLUME OFFSET ADJUST
◄
Offset Level +0.0dB
Offset
Title
►
EDIT CHANNEL NAME
◄
Analog In 1
®
AN 1
Assigned channel
name
Title
Input number
