45
Note
·
You have to execute this menu option if you want to save and apply
your latest changes to the network settings. Otherwise, your new
configuration will be dismissed!
8.4.1.3 Load Factory Defaults
This function allows you to restore the factory settings of your DNA 1's
network driver. The DNA 1 is factory-set to wired Ethernet connection
with DHCP activated. This way, if you connect your device to a wired
network, it should be ready to use.
Select this menu option and confirm your selection with
set
or
OK
. The
DNA 1 loads now the factory default settings.
After successfully loading the factory defaults the cursor automatically
marks the menu item
Save & Apply Settings
. You must execute
this menu item as described in section
"8.4.1.2 - Save & Apply Settings"
on page 44
to apply the factory defaults.
Note
·
You have to execute menu item
Save and Apply Settings
if
you want to save and apply the factory default settings. Otherwise,
this configuration will be dismissed!
·
If you accidentally selected this option and the factory default
settings are loaded, you are able to exit the menu with the key
ä
of
your Audionet Metal Remote Control
RC 2
or by holding down the
set
key for longer than 2 seconds. This way the settings accidentally
loaded will not be activated and your previous settings will remain.
