AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 92 / 160

MP-40x SIP MediaPack BRI Series
SIP User's Manual 92 Document #: LTRT-53301
Figure 6-15: IP to Tel Routing Table Screen
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the Tel to IP Routing table according to
940H993H
Table 6-13 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section
994H
6.9 , ’
995H
Saving Configuration
Settings on the MediaPack ’ on page
996H
131 ).
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-13: IP to Tel Routing Table Parameters
Parameter Description
Position
Determines the priority of the configured routing rule, where "0" has the highest
priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number].
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number].
Source IP Address
[src-ip-match <IP>]
Match the source IP of the invite.
Destination interface
[dest-if <isdn if number>]
Destination ISDN interface.
Profile ID
[[profile-id <id>]]
Determines the profile to be used.
Using CLI
To define the IP -> Tel routing parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “routing ip2tel table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help.
Note: <num> denotes the dialing plan notation (refer to Section '
943H997H
Dialing Notations ' on page
944H998H
56 ).