AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 87 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the number manipulation table according to
919H969H
Table 6-8 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section
970H
6.9 , ’
971H
Saving Configuration
Settings on the MediaPack ’ on page
972H
131 ).
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-9: IP-to-Tel Source Number Manipulation Table
Parameter Description
Position Determines the priority of the configured manipulation rule, where "0" has the
highest priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number]
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number]
Number of Stripped Digits
[strip [prefix | suffix] <num>]
Strip the number of digits at the beginning of the number. If the number is included
in parenthesis "()", this function strips the suffix. A combination of prefix and suffix
e.g. 3(2) is valid.
Prefix (Suffix) to Add
[add [prefix | suffix] <num>]
Adds this prefix or (suffix). A combination of prefix and suffix e.g. 3(2) is valid.
Number of Digits to Leave
[leave <num>]
Number of remaining digits from the right.
Using CLI
To change the IP -> Tel source number manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “manipulation ip2tel src-table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help
Note: The table is processed downwards. The processing stops after the first
match. This means that the order is relevant.
6.2.2.10 Tel-to-IP Source Numbers
The Tel to IP Source Number Manipulation table is used to define rules for changing the
destination number received in telephone-to-IP calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first successful manipulation.