AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 39 / 160

SIP User's Manual 4 . Initial Configuration
Version 2.4 39 June 2008
Binding: ethernet 0 0 1/ip
State: OPENED
192.168.2.1 (if-ip)[WAN]#
♦
PPPoE:
a.
192.168.2.1(if-ip)[WAN]# shutdown <CR>
b. Ensure that you have a PPPoE server in your WAN network.
c. Change the interface mode to PPPoE using the following command:
192.168.2.1<if-ip>[WAN]#ipmode PPPoE <CR>
d. Configure the PPPoE settings by typing the following command:
192.168.2.1(if-ip)[WAN]# pppoe user <username> secret
<password> authmode <chap|pap> <CR>
192.168.2.1 (if-ip)[WAN]#
192.168.2.1 (if-ip)[WAN]#pppoe user username secret password
authmode chap oe user username secret password authmode chap
pap
192.168.2.1 (if-ip)[WAN]#
e. Enable the new configuration by typing the following command:
192.168.2.1(if-ip)[WAN]# no shutdown <CR>
f. Verify the new WAN IP settings by typing the following command:
192.168.2.1(if-ip)[WAN]# show ip interface WAN <CR>
g. Exit the WAN mode using the following command:
192.168.2.1(if-ip)[WAN]#
exit
<CR>
h. Continue to Step
695H721H
6 to configure the default gateway IP address.
6. Configure the default gateway (relevant to Static and PPPoE WAN interface modes),
by typing the following command:
192.168.2.1(cfg)#
192.168.2.1(cfg)# context ip router <CR>
192.168.2.1(ctx-ip)[router]# route 0.0.0.0 0.0.0.0 <Default
Gateway IP> <CR>
In our example setup, the default gateway is defined as 10.15.0.1.
192.168.2.1(if-ip)[WAN]#context ip
192.168.2.1(ctx-ip)[router]#route 0.0.0.0 0.0.0.0 10.15.0.1
192.168.2.1(ctx-ip)[router]#
7. Save the configuration by typing the following command:
192.168.2.1 # store-running-config
192.168.2.1(ctx-ip)[router]#store-running-config
192.168.2.1(ctx-ip)[router]#