AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 33 / 160

SIP User's Manual 4 . Initial Configuration
Version 2.4 33 June 2008
4.1.2 Configuring the MediaPack's LAN and WAN IP Addresses
The MediaPack is supplied with default networking parameters (show in
673H697H
Table 4-1 below)
and with an application software residing on its flash memory (with factory default
parameters).
The MediaPack's default LAN IP address is used to initially access the device.
To assign an IP address to the MediaPack you can use one of the following methods:
„
HTTP using a Web browser (refer to '
674H698H
Assigning an IP Address Using HTTP ' below).
„
Embedded command line interface (CLI) accessible via Telnet or serial connection
(refer to Section '
675H699H
Assigning an IP Address using CLI ' on page
676H700H
36 ).
„
DHCP (refer to Section '
677H701H
Services ' on page
678H702H
115 ).
Table 4-1: MediaPack Default Networking Parameters
Network Interface IP Address Subnet Mask Address
LAN 192.168.2.1 255.255.255.0
WAN Assigned by DHCP Assigned by DHCP
If these default addresses correspond with those of your network, skip to Section
'
679H703H
Connecting the MediaPack to the Network ' on page
680H704H
40 . Otherwise, refer to the following
procedure to change the addresses and network masks.
4.1.2.1 Assigning an IP Address Using HTTP
The procedure below describes how to configure the MediaPack's networking parameters
using the embedded Web server.
¾
To assign an IP address using HTTP take the next 7 steps:
1. Open a standard Web-browsing application such as Microsoft™ Internet Explorer™ or
Firefox.
2. In the browser's Uniform Resource Locator (URL) field, specify the IP address of the
MediaPack's LAN interface (i.e., http://192.168.2.1); the embedded Web server’s
Login screen appears, shown in
681H705H
Figure 4-3.
Figure 4-3: Login Screen