AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 76 / 160

MP-40x SIP MediaPack BRI Series
SIP User's Manual 76 Document #: LTRT-53301
Figure 6-6: ISDN General Settings Screen
2. Configure the ISDN general parameters according
876H904H
Table 6-4 .
3. Click the Submit button to apply your changes.
4. To save the changes to the flash memory, refer to Section
905H
6.9 , ’
906H
Saving Configuration
Settings on the MediaPack ’ on page
907H
131 ).
Table 6-4: ISDN General Parameters
Parameter Description
Clock Source
[clock-mode master]
Defines which port to use as clock source.
Valid options include:
ƒ
None = the system will use an internal clock
ƒ
0…3 = ISDN port 0 to 3, depending on model
Note: The selected clock must be configured as Uni-Side USER; otherwise the
system uses an internal clock.
Using CLI
To define the clock source parameters using CLI:
1. Log on to the system.
2. Change to the configuration mode.
3. From the main configuration mode, change to the “port pstn” mode.
4. To enter the "port pstn" mode, use the command
port pstn 0 <0..3>
Where the last number indicates the port as labeled on the case.
5. Use the commands in square brackets ([]) to change the parameter values
To define the tone set parameters using CLI:
1. Log on to the system.
2. Change to the configuration mode.
3. From the main configuration mode, change to the “context cs” mode.
4. From the “context cs” mode, change to the “interface pstn” mode.
5. To enter the “interface pstn” mode, use the command:
interface pstn <0..3>
Where the last number indicates the interface number
6. Use the command
tone-set <name>
to change the tone set. Use tab completion to obtain a list of
available tone sets.
For more information on CLI, refer to Chapter
879H908H
5.3 on page
880H909H
56 .
6.2.2.2 ISDN Port Settings
The ISDN Port Settings option opens the 'ISDN Ports' screen. This screen allows you to
configure an individual BRI port.