AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 91 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
3. Configure the Tel to IP Routing table according to
935H987H
Table 6-12 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section
988H
6.9 , ’
989H
Saving Configuration
Settings on the MediaPack ’ on page
990H
131 )..
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.
Table 6-12: Tel to IP Routing Table Parameters
Parameter Description
Position
Determines the priority of the configured routing rule, where "0" has the highest
priority.
Destination Number
[dest-num-match <num>]
Match the destination number [prefix, suffix, number].
Source Number
[src-num-match <num>]
Match the source number [prefix, suffix, number].
Destination IP Address
[dest-ip <IP>]
Defines the destination IP.
Profile ID
[profile-id <id>]
Determines the profile to be used.
Using CLI
To change the Tel -> IP destination number manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “routing tel2ip table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help.
Note 1: The key “dest-if sip” is required if Call Routing is configured using the CLI. If call routing is configured
using the Web interface, this key is implicitly added.
Note 2: <num> denotes the dialing plan notation (refer to Section '
938H991H
Dialing Notations ' on page
939H992H
56 ).
6.2.3.2 IP to Tel Routing Table
The IP to Tel Routing Table is used to route incoming IP calls to groups of channels called
ISDN interfaces. Calls are assigned to ISDN interfaces according to any combination of the
following three options (or using each independently):
„
Destination phone prefix
„
Source phone prefix
„
Source IP address
The call is sent to the specified ISDN interface which then selects an available ISDN port.
¾
To configure the IP to Tel Routing table take these 5 steps:
1. Open the ‘IP to Tel Routing Table’ screen ( Protocol Management menu > Routing
Tables submenu > IP to Tel Routing option).