AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 130 / 160

MP-40x SIP MediaPack BRI Series
SIP User's Manual 130 Document #: LTRT-53301
6.8.3 Auto Reset
If autoreset is enabled and any of the files have been upgraded a reset will be initiated
automatically after the automatic upgrade process has been terminated.
Table 6-28: Automatic Software Upgrade CLI Parameters
Parameter Description
[[no] image-file-url <URL>]
Specifies the name of the SW image file and the location of the HTTP server
(IP or FQDN) from which the gateway loads the new Software.
For example:
300H
http://10.0.0.1/mp40x/current_version .
Note 1: The filename may contain the string <MAC>. This string will be
replaces with the MAC address of the WAN interface (leading zeros and : as
separator)
Note 2: The maximum length of the URL is 99 characters.
[[no] cpt-file-url <ULR>]
Specifies the name of the cpt file and the location of the HTTP server (IP or
FQDN) from which the gateway loads the new Software.
For example:
301H
http://10.0.0.1/mp40x/current_ cpt.
Note 1: The filename may contain the string <MAC>. This string will be
replaces with the MAC address of the WAN interface (leading zeros and : as
separator)
Note 2: The maximum length of the URL is 99 characters.
[[no] config-file-url <URL>]
Specifies the name of the configuration file and the location of the HTTP server
(IP or FQDN) from which the gateway loads the new Software.
For example:
302H
http://10.0.0.1/mp40x/current_ cpt.
Note 1: The filename may contain the string <MAC>. This string will be
replaces with the MAC address of the WAN interface (leading zeros and : as
separator)
Note 2: The maximum length of the URL is 99 characters.
[[no] autoreset]
Defines if the system automatically resets after update of:
•
Image
•
Cpt file
•
Config file
Default: enabled
[[no] update-time [boot |
frequency <hh:mm> | daytime
<hh:mm>]
Defines the update frequency. The following commands are possible
•
no update time: disable automatic update
•
update time frequency hh:mm: Update the system every hh:mm
•
update time daytime hh:mm: update the system daily at hh:mm (24
hour notation)
Default: no update-time
Using CLI
To configure the automatic software upgrade using CLI:
4.
Log on to the system.
6. Change to the configuration mode.
7. Use the commands in [] to configure the system.