AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 83 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
Note: the actions “strip leave add” are executed in the following order: strip
(prefix/suffix); leave; add (prefix/suffix).
6.2.2.7 IP-to-Tel Destination Numbers
The IP to Tel Destination Number Manipulation table is used to change the destination
number received in IP-to-telephone incoming calls. The table is processed from top to
bottom, where the first matching rule is used to manipulate the number. Processing stops
after the first manipulation.
Note: For a description on the convention for entering telephone numbers in the
Manipulation tables, refer to Section '
907H955H
Convention for Entering Phone
Numbers in Tables ' on page
908H956H
56 .
¾
To configure IP-to-Tel Destination Numbers:
1. Open the IP to Tel Destination Number Manipulation Table ( Protocol Management
menu > Manipulation Tables submenu > IP
Æ
Tel Destination Numbers option).
Figure 6-10: IP to Tel Destination Number Manipulation Table
2. From the ‘Position' drop-down list, select the entry that you want to add.
3. Configure the number manipulation table according to
909H957H
Table 6-7 .
4. Click the Insert button to insert an entry at the specified position.
5. To save the changes to the flash memory, refer to Section
958H
6.9 , ’
959H
Saving Configuration
Settings on the MediaPack ’ on page
960H
131 ).
You can modify an entry by clicking the Modify button and delete an entry by clicking the
Remove button.