AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 77 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
¾
To configure the ISDN ports:
1. Open the ‘ISDN Ports’ screen ( Protocol Management menu > ISDN submenu >
ISDN Port Settings option).
Figure 6-7: ISDN Ports Screen
2. From the 'ISDN Ports' list, select an ISDN port.
3. Configure the ISDN Ports parameters according to
883H910H
Table 6-5 .
4. Click the Submit button to save your changes.
5. To save the changes to the flash memory, refer to Section
911H
6.9 , ’
912H
Saving Configuration
Settings on the MediaPack ’ on page
913H
131 ).
Table 6-5: ISDN Ports Parameters
Parameter Description
Uni-side
[uni-side <net|usr>]
Determines if the interface is user or network side.
ƒ
Net
ƒ
User (default)
Permanent-layer2
[[no]permanent-layer2]
Enables the system to attempt to keep the ISDN Layer 2 connection open.
Valid options include:
ƒ
Enable = permanent layer 2
ƒ
Disable (default)
Layer 2 mode
[l2proto <pp|pmp>]
Configures the layer 2 mode.
Valid options include:
ƒ
PP = point to point
ƒ
PMP (default) = point to multipoint
ISDN Interface
[[no]bind <if_num>]
Defines the ISDN interface (number) to which this port is assigned.
Valid range is 0 to 3. The default is <port num>.
For more information about ISDN interfaces, see Section
86H914H
6.2.2.3 on page
887H915H
78 .
Admin State
[up|down]
The administrative status (up or down) of the interface.
Valid options include:
ƒ
Enable (default)
ƒ
Disable