AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 56 / 160

MP-40x SIP MediaPack BRI Series
SIP User's Manual 56 Document #: LTRT-53301
„
e di aa c k M P
Startup Process” on page
788H
155).
„
Maintenance: use this menu to save configuration changes to the flash and for Reset
the Gateway (refer to Section
789H
6.9 , ’
790H
Saving Configuration Settings on the
MediaPack ’ on page
791H
131 ).
5.2.4 Convention for Entering Phone Numbers in Tables
Phone numbers entered into various tables on the gateway, such as the Tel to IP routing
table, must be entered without any formatting characters. For example, if you wish to enter
the phone number 555-1212, it must be entered as 5551212 without the hyphen (-). If the
hyphen is entered, the entry does not work. The hyphen character is used in number entry
only, as part of a range definition.
5.2.5 Dialing Notations
762H792H
Table 5-1 describes the dialing notations for configuring destination and source telephone
number matching.
Table 5-1: Dialing Plan Notations
Notation Description
[n-m] Character range, e.g., [2-7]
[n, m] Character selection, e.g., [2,6,b]
* Any string
% Single character
The list below includes a few examples for dialing plan notations:
„
000[1-9]*: match all numbers with three leading zeros
„
*5: match all strings ending with 5
„
00%%%: match all numbers with length 5 starting with 00 (note that 00001
matches)
5.3
Embedded Command Line Interface
The MediaPack provides an embedded Command Line Interface (CLI) that can be used for
configuration and diagnostics. The CLI (or CommandShell) can be accessed using Telnet
or RS-232.
5.3.1 Logging into the CLI
You can access the MediaPack's CLI using a Telnet session or RS-232.
5.3.1.1 Embedded Telnet Server
¾
To access the CLI using the embedded Telnet server:
1. Use a standard Telnet application to connect to the MediaPack's Embedded Telnet
Server.