AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 121 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
Table 6-24: User Management CLI Parameters
Parameter Description
User Name User name used to log in to the management system.
Password Password required to log in to the management system
Access Read-only or Read/Write access rights.
Using CLI
To define User Management parameters via CLI:
1. Log on to the system.
2. Change to the configuration mode.
3. To configure a read-only user, use the command:
operator <name> password <password>
4. To add a read / write user, use the command:
administrator <name> password <password>
6.6
Status & Diagnostics
You can view the MediaPack's general system information using the Status & Diagnostic
menu on the main menu bar.
6.6.1 System Information
To view the MediaPack's system information, take the following step:
„
Open the 'System Information' screen ( Status & Diagnostics menu > System
Information submenu > System Information option).
Figure 6-32: System Information Screen