AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 47 / 160

SIP User's Manual 4 . Initial Configuration
Version 2.4 47 June 2008
Figure 4-12: SIP Users Screen
b. Add the SIP users ‘Name’ (phone number) and ‘Password'. (In our example
setup for
Unit A , SIP user ID 1 was defined with the name "1000" and without a
password; SIP user ID 2 was defined with the name "3000" and without a
password).
6. Click the Submit button.
7. In our example setup, verify that Users 1000@10.33.2.35 and 3000@10.33.2.35 are
registered at the Proxy Server 10.33.2.20.
For additional SIP-related parameters, refer to Section '
713H739H
SIP Gateway ' on page
714H740H
67 .
For detailed information on the parameters ‘Registration Time’ and ‘Authentication Mode’,
refer to refer to
715H741H
Table 6-2 on page
716H742H
70 .
4.1.7 Configuring Coder Groups
The procedure below describes how to define coder groups in the 'Coder Groups' screen.
In our example setup for Unit A, no configuration changes were made in this screen.
¾
To configure the coder groups take the next 2 steps:
1. In the 'Quick Setup' screen, click the Coder Groups arrow button or navigate to the
'Coder Groups' screen ( Protocol Management menu > Profile Definitions submenu
> Coder Group Profiles option).