AudioCodes MediaPack MP-402, Руководство пользователя

Страница: 89 / 160

SIP User's Manual 6 . Configuring the MediaPack
Version 2.4 159 June 2008
Table 6-10: Tel-to-IP Source Number Manipulation Table
Parameter Description
To change the Tel -> IP source number manipulations parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “manipulation tel2ip src-table” mode.
3. Enter a routing entry using the command:
pos <num> <values>
4. To remove a routing entry, use the command:
no pos <num>
For a detailed explanation of the supplied matching and manipulation criteria, use the online help
6.2.2.11 Clearmode Translation
The Clearmode translation table is used to translate ISDN bearer capability UDI to SIP
clearmode codec and vice versa. If enabled the following translation will be used:
If the incoming SIP connection has CLEARMODE as the most preferred codec the ISDN
setup will use Unrestricted Digital Information.
If the incoming ISDN setup indicates Unrestricted Digital Information, The CLEARMODE
codec will be used as the most preferred codec on the SIP side.
Table 6-11: Clearmode Translation
Parameter Description
Clearmode Translation
[[no] translate]
Enable or disable the clearmode translation.
Clearmode Encoding
Name
[encoding-name
[CLEARMODE | X-CCD]]
The encoding name to use for CLEARMODE. (Default is CLEARMODE)
CLEARMODE: Use “CLEARMODE” as encoding name as described in RFC4040.
X-CCD: Use “X-CCD” as encoding name.
Using CLI
To change the Clearmode Translation:
1. Log on to the system.
2. From the main configuration mode, change to the “manipulation clearmode” mode.
3. Use the commands in square brackets to change the parameters.
6.2.3 Routing Tables
The gateway provides two different routing tables:
„
Tel to IP Routing Table: configured for routing incoming Tel calls to IP addresses
(refer to Section '
927H979H
Tel to IP Routing Table ' on page
928H980H
90 )
„
IP to Tel Routing Table: configured for routing incoming IP calls to groups of channels