AudioCodes MediaPack MP-112, Руководство пользователя

Страница: 596 / 622

User's Manual 596 Document #: LTRT-65417
MP-11x & MP-124
Parameter Description
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Hunt
Group Settings' on page 204 .
Web: Channel Select Mode
EMS: Channel Selection Mode
[ChannelSelectMode]
Defines the method for allocating incoming IP-to-Tel calls to
a channel (port) for all Hunt Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Cyclic Ascending.

[6] By Source Phone Number

[9] Ring to Hunt Group

[11] Dest Ascending
Notes:

For a detailed description of the parameter's options, see
'Configuring Hunt Group Settings' on page
204 .

Channel select mode per Hunt Group can be configured
in the Hunt Group Settings (see 'Configuring Hunt Group
Settings' on page
204 ).
Web: Default Destination Number
[DefaultNumber]
Defines the default destination phone number, which is used
if the received message doesn't contain a called party
number and no phone number is configured in the <Endpoint
Phone Number Table' (see to Configuring Endpoint Phone
Numbers on page
203 ). This parameter is used as a starting
number for the list of channels comprising all the device's
Hunt Groups.
The default value is 1000.
Web: Source IP Address Input
[SourceIPAddressInput]
Determines which IP address the device uses to determine
the source of incoming INVITE messages for IP-to-Tel
routing.

[-1] = (Default) Not configured.

[0] SIP Contact Header = The IP address in the Contact
header of the incoming INVITE message is used.

[1] Layer 3 Source IP = The actual IP address (Layer 3)
from where the SIP packet was received is used.
Web: Use Source Number As Display
Name
EMS: Display Name
[UseSourceNumberAsDisplayName]
Determines the use of Tel Source Number and Display
Name for Tel-to-IP calls.

[0] No = (Default) If a Tel Display Name is received, the
Tel Source Number is used as the IP Source Number
and the Tel Display Name is used as the IP Display
Name. If no Display Name is received from the Tel side,
the IP Display Name remains empty.

[1] Yes = If a Tel Display Name is received, the Tel
Source Number is used as the IP Source Number and
the Tel Display Name is used as the IP Display Name. If
no Display Name is received from the Tel side, the Tel
Source Number is used as the IP Source Number and
also as the IP Display Name.

[2] Overwrite = The Tel Source Number is used as the IP
Source Number and also as the IP Display Name (even if